Basic Function

32-Bands EQ is an effect that changes the sound by changing the gain for each frequency.

Channel

Input: 1 - 8ch
Output: Same as Input channel
All input channels will be effected.

Feature

You can apply an equalizer for 1 to 32 bands.
Used for applications such as output correction.
Has a custom plugin GUI.

Equalizer settings

Item	Description	Initial Value	Lower Limit	Upper Limit
Use Filter (ENABLE)	Flag whether to use the filter or not.	False	-	-
Filter Type (TYPE)	Selects the type: low shelf, peaking, or high shelf.	Low shelf, peaking, high shelf	-	-
Frequency (FREQ)	Specifies the frequency at which the change begins.	Different for each band	0 Hz	24000 Hz
Q	Quality factor parameters. A value below 1.0 broadly and gently affects the range around the cutoff/center frequency, and a value above 1.0 emphasizes the range around the specified frequency.	1.00	0.10	10.00
Gain	Gain for the equalizer.	0.00	-24.00	24.00

Editing individual items on the graph

When selecting a band on the graph, you can edit the item individually by holding down a modifier key and using the mouse up/down or click.

Key	Mouse operation	Description
Ctrl ( Command )	Up/down operation	Change Q
Shift	Up/down operation	Change Gain
Alt	Click	Switch ENABLE / DISABLE

Manipulating multiple band points on the graph

You can select and move multiple bands by holding down the Ctrl (Command) key and clicking graph points, or by selecting a range on the graph.
You can also select all points on the graph by pressing Ctrl (Command) + A.