I3DL2 reverb parameters

Definition of parameters to be set with I3DL2 reverb. More...

Macros
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_ROOM   (0)
	Entire effect output volume [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_ROOM_HF   (1)
	Volume of reference frequency (high frequency) component [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DECAY_TIME   (2)
	Decay time of the rear reverberation sound [sec]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DECAY_HF_RATIO   (3)
	The ratio of high frequency attenuation to low frequency attenuation of the rear reverberation sound. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REFLECTIONS   (4)
	Volume of initial reflected sound [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REFLECTIONS_DELAY   (5)
	Delay time of early reflected sound [sec]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REVERB   (6)
	Volume of rear reverberation sound [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REVERB_DELAY   (7)
	Delay time of the rear reverberation sound [sec]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DIFFUSION   (8)
	Echo density of the rear reverberation sound [%]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DENSITY   (9)
	Modal density of rear reverberation [%]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_HF_REFERENCE   (10)
	RoomHF reference frequency (high frequency) [Hz]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_FRONT_INPUT   (11)
	Input level of the front component [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REAR_INPUT   (12)
	Input level of the rear component [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_CENTER_INPUT   (13)
	Input level of the center component [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_FRONT_OUTPUT   (14)
	Output level of the front component [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REAR_OUTPUT   (15)
	Output level of rear component [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_PARAMETER_CENTER_OUTPUT   (16)
	Output level of center component [mB]. More...
#define	CRIATOMEXASR_I3DL2_REVERB_NUM_PARAMETERS   (17)
	Number of parameters of I3DL2 reverb.
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_GENERIC    { -1000, -100, 1.49f, 0.83f, -2602, 0.007f, 200, 0.011f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "GENERIC".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_PADDEDCELL    { -1000, -6000, 0.17f, 0.10f, -1204, 0.001f, 207, 0.002f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "PADDED CELL".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_ROOM    { -1000, -454, 0.40f, 0.83f, -1646, 0.002f, 53, 0.003f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "ROOM".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_BATHROOM    { -1000, -1200, 1.49f, 0.54f, -370, 0.007f, 1030, 0.011f, 100.0f, 60.0f, 5000.0f}
	I3DL2 reverb preset "BATH ROOM".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_LIVINGROOM    { -1000, -6000, 0.50f, 0.10f, -1376, 0.003f, -1104, 0.004f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "LIVING ROOM".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_STONEROOM    { -1000, -300, 2.31f, 0.64f, -711, 0.012f, 83, 0.017f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "STONE ROOM".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_AUDITORIUM    { -1000, -476, 4.32f, 0.59f, -789, 0.020f, -289, 0.030f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "AUDITORIUM".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_CONCERTHALL    { -1000, -500, 3.92f, 0.70f, -1230, 0.020f, -2, 0.029f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "CONCERT HALL".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_CAVE    { -1000, 0, 2.91f, 1.30f, -602, 0.015f, -302, 0.022f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "CAVE".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_ARENA    { -1000, -698, 7.24f, 0.33f, -1166, 0.020f, 16, 0.030f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "ARENA".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_HANGAR    { -1000, -1000, 10.05f, 0.23f, -602, 0.020f, 198, 0.030f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "HANGER".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_CARPETEDHALLWAY    { -1000, -4000, 0.30f, 0.10f, -1831, 0.002f, -1630, 0.030f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "CARPETED HALLWAY".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_HALLWAY    { -1000, -300, 1.49f, 0.59f, -1219, 0.007f, 441, 0.011f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "HALLWAY".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_STONECORRIDOR    { -1000, -237, 2.70f, 0.79f, -1214, 0.013f, 395, 0.020f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "STONE CORRIDOR".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_ALLEY    { -1000, -270, 1.49f, 0.86f, -1204, 0.007f, -4, 0.011f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "ALLEY".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_FOREST    { -1000, -3300, 1.49f, 0.54f, -2560, 0.162f, -613, 0.088f, 79.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "FOREST".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_CITY    { -1000, -800, 1.49f, 0.67f, -2273, 0.007f, -2217, 0.011f, 50.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "CITY".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_MOUNTAINS    { -1000, -2500, 1.49f, 0.21f, -2780, 0.300f, -2014, 0.100f, 27.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "MOUNTAINS".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_QUARRY    { -1000, -1000, 1.49f, 0.83f, -10000, 0.061f, 500, 0.025f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "QUARRY".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_PLAIN    { -1000, -2000, 1.49f, 0.50f, -2466, 0.179f, -2514, 0.100f, 21.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "PLAIN".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_PARKINGLOT    { -1000, 0, 1.65f, 1.50f, -1363, 0.008f, -1153, 0.012f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "PARKING LOT".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_SEWERPIPE    { -1000, -1000, 2.81f, 0.14f, 429, 0.014f, 648, 0.021f, 80.0f, 60.0f, 5000.0f}
	I3DL2 reverb preset "SEWER PIPE".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_UNDERWATER    { -1000, -4000, 1.49f, 0.10f, -449, 0.007f, 1700, 0.011f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "UNDER WATER".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_SMALLROOM    { -1000, -600, 1.10f, 0.83f, -400, 0.005f, 500, 0.010f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "SMALL ROOM".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_MEDIUMROOM    { -1000, -600, 1.30f, 0.83f, -1000, 0.010f, -200, 0.020f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "MEDIUM ROOM".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_LARGEROOM    { -1000, -600, 1.50f, 0.83f, -1600, 0.020f, -1000, 0.040f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "LARGE ROOM".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_MEDIUMHALL    { -1000, -600, 1.80f, 0.70f, -1300, 0.015f, -800, 0.030f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "MEDIUM HALL".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_LARGEHALL    { -1000, -600, 1.80f, 0.70f, -2000, 0.030f, -1400, 0.060f, 100.0f, 100.0f, 5000.0f}
	I3DL2 reverb preset "LARGE HALL".
#define	CRIATOMEXASR_I3DL2_REVERB_PRESET_PLATE    { -1000, -200, 1.30f, 0.90f, 0, 0.002f, 0, 0.010f, 100.0f, 75.0f, 5000.0f}
	I3DL2 reverb preset "PLATE".

Detailed Description

Definition of parameters to be set with I3DL2 reverb.

See also

criAtomExAsrRack_SetEffectParameter, criAtomExAsrRack_GetEffectParameter

Attention

The preset is an array of information up to parameter index 0-10, and it can not be specified for index 11-13.

Macro Definition Documentation

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_ROOM

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_ROOM   (0)

Entire effect output volume [mB].

Description:

In this parameter index, specify the final output volume of I3DL2 reverb.
The initial value of the parameter is -1000.0 f, the minimum value is -10000.0 f, and the maximum value is 0.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_ROOM_HF

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_ROOM_HF   (1)

Volume of reference frequency (high frequency) component [mB].

Description:

In this parameter index, specify the volume of reference frequency (high frequency) component of I3DL2 reverb.
The initial value of the parameter is -100.0 f, the minimum value is -10000.0 f, and the maximum value is 0.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DECAY_TIME

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DECAY_TIME   (2)

Decay time of the rear reverberation sound [sec].

Description:

In this parameter index, specify the decay time of the rear reverberation of the I3DL2 reverb.
The initial value of the parameter is 1.49 f, the minimum value is 0.1 f, and the maximum value is 20.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DECAY_HF_RATIO

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DECAY_HF_RATIO   (3)

The ratio of high frequency attenuation to low frequency attenuation of the rear reverberation sound.

Description:

In this parameter index, specify the ratio of high frequency attenuation to low frequency attenuation in the rear reverberation of the I3DL2 reverb.
The initial parameter value is 0.83 f, the minimum value is 0.1 f, and the maximum value is 2.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REFLECTIONS

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REFLECTIONS   (4)

Volume of initial reflected sound [mB].

Description:

In this parameter index, specify the volume of early reflection sound of I3DL2 reverb.
The initial value of the parameter is -2602 f, the minimum value is -10000.0 f, and the maximum value is 1000.0.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REFLECTIONS_DELAY

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REFLECTIONS_DELAY   (5)

Delay time of early reflected sound [sec].

Description:

In this parameter index, specify the volume of early reflection sound of I3DL2 reverb.
The initial value of the parameter is 0.007 f, the minimum value is 0.0 f, and the maximum value is 0.3 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REVERB

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REVERB   (6)

Volume of rear reverberation sound [mB].

Description:

In this parameter index, specify the volume of the rear reverberation of the I3DL2 reverb.
The initial value of the parameter is 200 f, the minimum value is -10000.0 f, and the maximum value is 2000.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REVERB_DELAY

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REVERB_DELAY   (7)

Delay time of the rear reverberation sound [sec].

Description:

In this parameter index, specify the delay time of the rear reverberation of the I3DL2 reverb.
The initial value of the parameter is 0.011 f, the minimum value is 0.0 f, and the maximum value is 0.1 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DIFFUSION

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DIFFUSION   (8)

Echo density of the rear reverberation sound [%].

Description:

In this parameter index, specify the echo density of the rear reverberation of the I3DL2 reverb.
The initial value of the parameter is 100.0 f, the minimum value is 0.0 f, and the maximum value is 100.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DENSITY

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_DENSITY   (9)

Modal density of rear reverberation [%].

Description:

In this parameter index, specify the modal density of the rear reverberation of the I3DL2 reverb.
The initial value of the parameter is 100.0 f, the minimum value is 0.0 f, and the maximum value is 100.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_HF_REFERENCE

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_HF_REFERENCE   (10)

RoomHF reference frequency (high frequency) [Hz].

Description:

In this parameter index, specify the reference frequency (high range) of RoomHF of I3DL2 reverb.
The initial value of the parameter is 5000.0 f, the minimum value is 20.0 f, and the maximum value is 20000.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_FRONT_INPUT

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_FRONT_INPUT   (11)

Input level of the front component [mB].

Description:

Specify the input level of the front (L, R channel) component of I3DL2 reverb to this parameter index.
Please note that it can not be specified with the preset of I3DL2 reverb.
The initial value of the parameter is 0.0 f, the minimum value is -10000.0 f, and the maximum value is 0.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REAR_INPUT

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REAR_INPUT   (12)

Input level of the rear component [mB].

Description:

Specify the input level of the rear (surround L, surround R channel) component of the I3DL2 reverb to this parameter index.
Please note that it can not be specified with the preset of I3DL2 reverb.
The initial value of the parameter is 0.0 f, the minimum value is -10000.0 f, and the maximum value is 0.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_CENTER_INPUT

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_CENTER_INPUT   (13)

Input level of the center component [mB].

Description:

Specify the input level of the center (C channel) component of I3DL2 reverb to this parameter index.
Please note that it can not be specified with the preset of I3DL2 reverb.
The initial value of the parameter is -10000.0 f, the minimum value is -10000.0 f, and the maximum value is 0.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_FRONT_OUTPUT

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_FRONT_OUTPUT   (14)

Output level of the front component [mB].

Description:

Specify the output level of the front (L, R channel) component of I3DL2 reverb to this parameter index.
Please note that it can not be specified with the preset of I3DL2 reverb.
The initial value of the parameter is 0.0 f, the minimum value is -10000.0 f, and the maximum value is 0.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REAR_OUTPUT

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_REAR_OUTPUT   (15)

Output level of rear component [mB].

Description:

Specify the output level of the rear (surround L, surround R channel) component of I3DL2 reverb to this parameter index.
Please note that it can not be specified with the preset of I3DL2 reverb.
The initial value of the parameter is 0.0 f, the minimum value is -10000.0 f, and the maximum value is 0.0 f.

CRIATOMEXASR_I3DL2_REVERB_PARAMETER_CENTER_OUTPUT

#define CRIATOMEXASR_I3DL2_REVERB_PARAMETER_CENTER_OUTPUT   (16)

Output level of center component [mB].

Description:

Specify the output level of the center (C channel) component of I3DL2 reverb to this parameter index.
Please note that it can not be specified with the preset of I3DL2 reverb.
The initial value of the parameter is -10000.0 f, the minimum value is -10000.0 f, and the maximum value is 0.0 f.