 |
CriWare Unreal Engine
Plug-ins for CriWare solutions.
|
|
CriWare Unreal Engine
Plug-ins for CriWare solutions.
|
#include <AtomBusEffectLimiter.h>
Public 成员函数 | |
| FAtomBusEffectLimiterSettings () | |
Public 属性 | |
| float | AttackTime |
| bool | bBypass |
| float | Gain |
| float | ReleaseTime |
| float | SidechainGain |
| float | SidechainMixRatio |
| float | SurroundLink |
| float | Threshold |
| EAtomLimiterType | Type |
| FAtomBusEffectLimiterSettings::FAtomBusEffectLimiterSettings | ( | ) |
| float FAtomBusEffectLimiterSettings::AttackTime |
Specifies the attack time of the limiter in milliseconds. The time until compression is completed.
| bool FAtomBusEffectLimiterSettings::bBypass |
If true, input audio is directly routed to output audio with applying any effect.
| float FAtomBusEffectLimiterSettings::Gain |
Specify the final output gain of the limiter in decibels (dB).
| float FAtomBusEffectLimiterSettings::ReleaseTime |
Specifies the release time of the limiter in milliseconds. The time from when the amplitude becomes below the threshold until the end of compression.
| float FAtomBusEffectLimiterSettings::SidechainGain |
Specifies the gain of the sidechain signal in decibels (dB).
| float FAtomBusEffectLimiterSettings::SidechainMixRatio |
Specifies the mix ratio between the sidechain signal and the original bus signal in percent. 100% uses only the sidechain signal, while 0% uses only the original bus signal.
| float FAtomBusEffectLimiterSettings::SurroundLink |
Specify the surround link strength of the limiter. Surround link function changes the compression strength using the lowest amplitude value in all channels. 100% fully uses the lowest amplitude value in all channels, while 0% turns off the surround link function.
| float FAtomBusEffectLimiterSettings::Threshold |
Specifies the limiter threshold for amplitude compression in decibels (dB).
| EAtomLimiterType FAtomBusEffectLimiterSettings::Type |
Specifies the limiter amplitude detection value type.
1.16.0