Parameter of the Bit Crusher

Definition of parameters to be set with bit crusher. 更多...

宏定义
#define	CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DRIVE_DB   (0)
	Strength of distortion[dB] 更多...
#define	CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DEPTH_BITS   (1)
	Number of quantization bits 更多...
#define	CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DOWN_SAMPLING   (2)
	Downsampling 更多...
#define	CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DRY_MIX   (3)
	Percentage of dry component 更多...
#define	CRIATOMEXASR_BIT_CRUSHER_PARAMETER_WET_MIX   (4)
	Percentage of wet component 更多...
#define	CRIATOMEXASR_BIT_CRUSHER_PARAMETER_OUTPUT_GAIN   (5)
	Output level [amplitude] 更多...
#define	CRIATOMEXASR_BIT_CRUSHER_NUM_PARAMETERS   (6)
	Number of parameters of bit crusher

详细描述

Definition of parameters to be set with bit crusher.

参见

criAtomExAsrRack_SetEffectParameter, criAtomExAsrRack_GetEffectParameter

宏定义说明

CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DRIVE_DB

#define CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DRIVE_DB   (0)

Strength of distortion[dB]

Description:

In this parameter index, specify the distortion strength (drive) of the bit crusher.
The initial value of the parameter is 0.5f, the minimum value is 0.0f, and the maximum value is 48.0f.

CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DEPTH_BITS

#define CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DEPTH_BITS   (1)

Number of quantization bits

Description:

Specify the number of quantization bits of the bit crusher.
The smaller the setting, the smaller the amplitude becomes Lo-Fi.
The initial value of the parameter is 8, the minimum value is 1, and the maximum value is 24.

CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DOWN_SAMPLING

#define CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DOWN_SAMPLING   (2)

Downsampling

Description:

Specify down sampling of bit crusher.
The longer the setting, the longer the time becomes Lo-Fi.
The initial value of the parameter is 8, the minimum value is 1, and the maximum value is 100.

CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DRY_MIX

#define CRIATOMEXASR_BIT_CRUSHER_PARAMETER_DRY_MIX   (3)

Percentage of dry component

Description:

Specify the ratio at which the bit crusher dry (Original sound) component is mixed.
The initial value of the parameter is 0.71f, the minimum value is 0.0f, and the maximum value is 1.0f.

CRIATOMEXASR_BIT_CRUSHER_PARAMETER_WET_MIX

#define CRIATOMEXASR_BIT_CRUSHER_PARAMETER_WET_MIX   (4)

Percentage of wet component

Description:

Specify the ratio at which the bit crusher wet (Distortion) component is mixed.
The initial value of the parameter is 0.71f, the minimum value is 0.0f, and the maximum value is 1.0f.

CRIATOMEXASR_BIT_CRUSHER_PARAMETER_OUTPUT_GAIN

#define CRIATOMEXASR_BIT_CRUSHER_PARAMETER_OUTPUT_GAIN   (5)

Output level [amplitude]

Description:

Specify the output level of the bit crusher.
The initial value of the parameter is 0.5f, the minimum value is 0.0f, and the maximum value is 2.4 power of 10 (value corresponding to 48 dB).