Definition of parameters to be set in distortion. 更多...

宏定义
#define	CRIATOMEXASR_DISTORTION_PARAMETER_DRIVE_DB (0)
	Strength of distortion [dB] 更多...

#define	CRIATOMEXASR_DISTORTION_PARAMETER_DRY_MIX (1)
	The ratio of dry component 更多...

#define	CRIATOMEXASR_DISTORTION_PARAMETER_WET_MIX (2)
	The ratio of wet component 更多...

#define	CRIATOMEXASR_DISTORTION_PARAMETER_OUTPUT_GAIN (3)
	Final output level [amplitude] 更多...

#define	CRIATOMEXASR_DISTORTION_NUM_PARAMETERS (4)
	Number of distortion parameters

详细描述

Definition of parameters to be set in distortion.

参见: criAtomExAsrRack_SetEffectParameter, criAtomExAsrRack_GetEffectParameter

宏定义说明

#define CRIATOMEXASR_DISTORTION_PARAMETER_DRIVE_DB (0)

Strength of distortion [dB]

Description:: Specify strength of distortion (drive) for this parameter index.
The initial value of the parameter is 0.5 f, the minimum value is 0.0 f, and the maximum value is 48.0 f.

#define CRIATOMEXASR_DISTORTION_PARAMETER_DRY_MIX (1)

The ratio of dry component

Description:: Specify the ratio of mixing the dry (original) component of the distortion to this parameter index.
The initial value of the parameter is 0.71 f, the minimum value is 0.0 f, and the maximum value is 1.0 f.

#define CRIATOMEXASR_DISTORTION_PARAMETER_WET_MIX (2)

The ratio of wet component

Description:: Specify the ratio of mixing the wet (distortion) component of the distortion to this parameter index.
The initial value of the parameter is 0.71 f, the minimum value is 0.0 f, and the maximum value is 1.0 f.

#define CRIATOMEXASR_DISTORTION_PARAMETER_OUTPUT_GAIN (3)

Final output level [amplitude]

Description:: Specify the final output level of the distortion in this parameter index.
The initial value of the parameter is 0.5 f, the minimum value is 0.0 f, and the maximum value is 2.4 power (value corresponding to 48 dB) of 10.