Name

Name	Value Range	Description
Name		Shows the Track name.

Comment

Name	Value Range	Description
Comment		You can enter any comment here.

Name	Value Range	Description
Not include in build	True/False	Set to True if not make to include in ACB.
Encoded File Size		Total size of all the encoded material files referenced by the Waveform Regions contained in the Track.

Name	Value Range	Description
Apply Language		Includes tracks when building the specified language. If it is blank, it will be output in all languages. See also Selecting a Track based on the localized Language
Track Mono Flag	True/False	Flag for whether to make the track monophonic playback. Make the playback in the track monophonic with True. If waveform regions overlap, the first sounding region will stop. See also Designing Interactive Sound

Name	Value Range	Description
Mute	True/False	Mute flag setting. Set to True to mute the sound by setting the playback volume to 0 as much as possible.
Volume	0.0 - 5.0	Volume setting. Use it for the region placed in the track.
Volume Random Range	0.0 - 1.0	Volume random width setting. The value randomized with the width of this setting item for the volume is used as the volume value.

Name	Value Range	Description
Pitch	-1200 - 1200 (cent)	Pitch setting for cents.
Pitch Random Range	0 - 1200 (cent)	Random width setting for pitch.

Name	Value Range	Description
Pan3D Angle	-180 - 180	When Pan is specified, this represents the angle at which the Waveform Region is played.
Pan3D Angle Random	0 - 360	Random range for the Pan3D angle.
Pan3D Internal Distance	0.0 - 1.0	Distance of the interior pan. 0.0: origin (listener point), 1.0: circumference on which the speaker is placed. See also Interior Distance
Pan3D Interior Distance Rnd	0.0 - 1.0	Random range for the Pan3D interior distance.

Name	Value Range	Description
Biquad Filter Type	Off/Low pass/High pass/Notch/Low shelf/High shelf/Peaking	Type of the Biquad Filter .
Biquad Cutoff	0.00(24Hz)～1.00(24kHz)	Cutoff frequency of the biquad filter.
Biquad Cutoff Frequency		Cutoff frequency of the biquad filter. Displays the Biquad Cof value as a frequency (not editable).
Biquad Cutoff Random Range	0.00～1.00	Random range for the cutoff frequency of the biquad filter.
Biquad Q	0.10～10.00	Biquad filter Q parameter.
Biquad Q Random Range	0.00～10.00	Random range for the Q parameter of the biquad filter.
Biquad Gain	0.00～5.00	Biquad filter gain. Valid when the type of the Biquad Filter Type is Low shelf/High shelf/Peaking.
Higher Cutoff	0.0(24Hz) - 1.0(24kHz)	High cutoff frequency of the Band Pass Filter .
Lower Cutoff	0.0(24Hz) - 1.0(24kHz)	Low cutoff frequency of the bandpass filter.

Name	Value Range	Description
Bus Map		Bus setting for managing the name of the bus that is sent to the Bus. (Not editable. Edited in the Cue Inspector.)
Bus Send Destination Bus Name 0 to 7		Bus name in the Mixer that is used for a bus send. (Not editable. Edited in the Cue Inspector.)
Bus Send 0 to 7	0.0 - 1.0	Output level setting for the bus to send.

Name	Value Range	Description
Pan3D Volume	0.0 - 1.0	Level of the panning effect with Pan . 0 means no output from the Pan component.
Center	0.0 - 1.0	Level of the center output. See also Center / LFE
LFE	0.0 - 1.0	Level of the LFE output.
3D Positioning Volume	0.0 - 1.0	Level of the panning effect with 3D Positioning . 0 means no output from the 3D positioning component.

Name	Value Range	Description
Block Transition Playback Type	Playback Always/Playback Transition/Playback on the first transition	Displayed for a block. Playback Always: Normal track playback. Playback Transition: Playback is performed only when transitioning to another block. If the next track cannot be played, it is performed at the next transition. Playback on the first transition: Playback is performed only on the first transition since being transitioned from another block. See also Block transition sound type setting for each track

Name	Value Range	Description
Switch Range	0.000 - 1.000	Switch range when the Cue type is "switch". See also Setting a Game Variable to a Switch-Type Cue , Designing Interactive Sound
Selector Label		Specifies the Selector Label. Valid only when the sequence type is polyphonic or switch, and the Track as the same selector label than the one specified by the run-time. See also Selector, Selector Assigning Selectors to Cues and Tracks, Switching the Footsteps Based on the Floor Type

Name	Value Range	Description
Track BPM	0.00 - 1000.00 [BPM]	BPM for each track specified when the Cue type is "track transition by selector" (0: Use beat synchronization information). See also Transition between Tracks with Different Tempos

Name	Value Range	Description
Random Weight	0 - 200	Random weight when Cue type is "random" or "random no repeat". See also Playback Track Probability Settings for a Random/Random No Repeat Cue
Playback Probability	0 - 100(%)	The probability that the Track will be played back. It is always played back when the value is 100%, and it is played back half the time when the value is 50%. See also Define sounds that may or may not play (play probability)

Name	Value Range	Description
Path		Shows the path of the object in the tool. (not editable)